Ever wonder if the office cleaners are actually changing the garbage bag out each night? Or does your neighbours dog or the neighbour hood skunk get into your garbage at night? Get a notification quickly and easy by configuring it for this purpose!

Core Settings

---

Notifications 15 Minutes

---

Report Interval 6 Hours

---

Samples Per Report 1

---

Temperature Settings

---

Fahrenheit (Your Choice)

---

High Limit 24 Degrees Celsius

---

Low Limit 5 Degrees Celsius

---

How to Configure

Firstly, go to "Configurations" from the "Settings" Mode of your qBiq view. From here, choose "Movement".

Core Configuration
Notifications: Every 15 minutes, so you don't get aggravated during one opening and shutting of the door.
Report Interval: Report every 6 hours, to minimize battery usage. Your qBiq should last a month or so this way.
Samples per Report: Feel free to sample the temperature or brightness while you are at it.

From there, choose these simple settings to monitor a door;

Movement Configuration
Blink When Moved: It's nice to see the qBiq blink when you open the door.
Level: .06g picks up a very slow door open, but not wind or air pressure from the door movement (depending on the door). 
Counter Threshold: If it moves even once, report.
Report Delay: Every time you open a door - you usually shut it again. Ergo, most movements will require at least two movements. If you believe you might take longer than ten seconds to make it through the door, give yourself some extra time!

With these settings, you'll get a notification every time someone opens your door.

Every time you give your qBiq a shake, it will update itself. 

 

 

Using the qBiq to monitoring a door opening is easy and fast. Wether it's securing a storage locker or monitoring a door of a locked cabinet you can get a notification quickly and easy by configuring it for this purpose! Also its just as easy to set the ideal temperature or humidity for storing certain pharmaceuticals and be notified if preset thresholds are reached or passed.

** It's also very important to note that many creams and ointments should be kept at the correct temperature at all times to prevent chemicals or compounds from separating in the tube or bottle. 

A medication that should be stored at room temperature means between 15 to 25 degrees Celsius; cool temperature means between 8 to 15 degrees Celsius; refrigeration means between 2 to 8 degrees Celsius; and freezing temperaturemeans -10 to -25 degrees Celsius.Get a notification quickly and easy by configuring it for this purpose!

Core Settings

---

Notifications 15 Minutes

---

Report Interval 6 Hours

---

Samples Per Report 1

---

Temperature Settings

---

Fahrenheit (Your Choice)

---

High Limit 25 Degrees Celsius

---

Low Limit 15 Degrees Celsius

---

How to Configure

Firstly, go to "Configurations" from the "Settings" Mode of your qBiq view. From here, choose "Movement".

Core Configuration
Notifications: Every 15 minutes, so you don't get aggravated during one opening and shutting of the door.
Report Interval: Report every 6 hours, to minimize battery usage. Your qBiq should last a month or so this way.
Samples per Report: Feel free to sample the temperature or brightness while you are at it.

From there, choose these simple settings to monitor a door;

Movement Configuration
Blink When Moved: It's nice to see the qBiq blink when you open the door.
Level: .06g picks up a very slow door open, but not wind or air pressure from the door movement (depending on the door). 
Counter Threshold: If it moves even once, report.
Report Delay: Every time you open a door - you usually shut it again. Ergo, most movements will require at least two movements. If you believe you might take longer than ten seconds to make it through the door, give yourself some extra time!

With these settings, you'll get a notification every time someone opens your door.

Every time you give your qBiq a shake, it will update itself. 

  

 

 

The ideal humidity to store artwork is 40-50% with a temperature between 70-75 degrees Fahrenheit (21-24 degrees Celsius). This is easily achieved with a humidifier. Severe climates can cause cracked paint, warping, yellowing of paper, and mold growth.

Set the ideal temperature and humidity for your precious art or even your art supplies. Get a notification quickly and easy by configuring it for this purpose!

Core Settings

---

Notifications 4 Hours

---

Report Interval 6 Hours

---

Samples Per Report 1

---

Temperature Settings

---

Fahrenheit (Your Choice)

---

High Limit 24 Degrees Celsius

---

Low Limit 21 Degrees Celsius

---

Humidity Settings

---

Fahrenheit (Your Choice)

---

High Limit 50 %

---

Low Limit 40 %

How to Configure

Firstly, go to "Configurations" from the "Settings" Mode of your qBiq view. From here, choose "Movement". We suggest turning movement off for this purpose because it will save battery.

Core Configuration
Notifications: Every 4 hours, so you don't get aggravated but it will give you a periodic reminder that the levels are outside your preferred settings.
Report Interval: Report every 6 hours, to minimize battery usage. Your qBiq should last a couple of months before needing a recharge if its set this way.
Samples per Report: Feel free to sample the brightness while you are at it.

From there, choose these simple settings to monitor a door;

Movement Configuration
We suggest turning movement off, that is of course unless you want to monitor a door or a lock where the artwork is stored. Movement would help with securing valuables by allowing you to get a notification if tampered with.

With these settings, you'll get a notification every time someone opens your door.

If movement is set, qBiq will update itself every time you give your qBiq a shake.